When you need to determine the applicability of a command or a group of commands to a specific product, the following *GET functions will return a TRUE or a FALSE (a 1 or a 0) value to indicate if the command in question is valid for your ANSYS product.
Additional *get commands for a new entity=PRODUCT
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Item2 It2num Description
pname -P option from Ansys command line
name start 1-n Ansys product name. A character string
of 8 characters is returned starting at
position It2num. Use *dim and *do to get
all 32 characters.
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
/aux12 Check for Ansys gateway command/feature /AUX12
/config Check for Ansys gateway command/feature /CONFIG
/ucmd Check for Ansys gateway command/feature /UCMD
addam Check for Ansys gateway command/feature ADDAM
alphad Check for Ansys gateway command/feature ALPHAD
antype Check for Ansys gateway command/feature ANTYPE
antype static Check for Ansys gateway command/feature ANTYPE,STATIC
antype buckle Check for Ansys gateway command/feature ANTYPE,BUCKLE
antype modal Check for Ansys gateway command/feature ANTYPE,MODAL
antype harmic Check for Ansys gateway command/feature ANTYPE,HARMIC
antype trans Check for Ansys gateway command/feature ANTYPE,TRANS
antype substr Check for Ansys gateway command/feature ANTYPE,SUBSTR
antype spectr Check for Ansys gateway command/feature ANTYPE,SPECTR
arclen Check for Ansys gateway command/feature ARCLEN
betad Check for Ansys gateway command/feature BETAD
blc4 Check for Ansys gateway command/feature BLC4
blc5 Check for Ansys gateway command/feature BLC5
block Check for Ansys gateway command/feature BLOCK
cdread Check for Ansys gateway command/feature CDREAD
con4 Check for Ansys gateway command/feature CON4
cone Check for Ansys gateway command/feature CONE
cqc Check for Ansys gateway command/feature CQC
cyl4 Check for Ansys gateway command/feature CYL4
cyl5 Check for Ansys gateway command/feature CYL5
cylind Check for Ansys gateway command/feature CYLIND
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
damorph Check for Ansys gateway command/feature DAMORPH
demorph Check for Ansys gateway command/feature DEMORPH
dsum Check for Ansys gateway command/feature DSUM
dvmorph Check for Ansys gateway command/feature DVMORPH
edadapt Check for Ansys gateway command/feature EDADAPT
edbvis Check for Ansys gateway commands/feature EDBVIS
eddc Check for Ansys gateway commands/feature EDDC
edcgen Check for Ansys gateway commands/feature EDCGEN
edclist Check for Ansys gateway commands/feature EDCLIST
edcontact Check for Ansys gateway commands/feature EDCONTACT
edcpu Check for Ansys gateway commands/feature EDCPU
edcrb Check for Ansys gateway commands/feature EDCRB
edcsc Check for Ansys gateway commands/feature EDCSC
edcts Check for Ansys gateway commands/feature EDCTS
edcurve Check for Ansys gateway commands/feature EDCURVE
eddamp Check for Ansys gateway commands/feature EDDAMP
edenergy Check for Ansys gateway commands/feature EDENERGY
edfplot Check for Ansys gateway commands/feature EDFPLOT
edhgls Check for Ansys gateway commands/feature EDHGLS
edhtime Check for Ansys gateway commands/feature EDHTIME
edhist Check for Ansys gateway commands/feature EDHIST
edint Check for Ansys gateway commands/feature EDINT
edvel Check for Ansys gateway commands/feature EDVEL
edlcs Check for Ansys gateway commands/feature EDLCS
edldplot Check for Ansys gateway commands/feature EDLDPLOT
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
edload Check for Ansys gateway commands/feature EDLOAD
edmp Check for Ansys gateway commands/feature EDMP
ednb Check for Ansys gateway commands/feature EDNB
edndtsd Check for Ansys gateway commands/feature EDNDTSD
edout Check for Ansys gateway commands/feature EDOUT
edpart Check for Ansys gateway commands/feature EDPART
edread Check for Ansys gateway commands/feature EDREAD
eddrelax Check for Ansys gateway commands/feature EDDRELAX
edrst Check for Ansys gateway commands/feature EDRST
edshell Check for Ansys gateway commands/feature EDSHELL
edsolve Check for Ansys gateway commands/feature EDSOLVE
edstart Check for Ansys gateway commands/feature EDSTART
edweld Check for Ansys gateway commands/feature EDWELD
edwrite Check for Ansys gateway commands/feature EDWRITE
ekill Check for Ansys gateway commands/feature EKILL
emis Check for Ansys gateway commands/feature EMIS
et Check for Ansys gateway commands/feature ET
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
etchg Check for Ansys gateway commands/feature ETCHG
fldata Check for Ansys gateway commands/feature FLDATA
flotest Check for Ansys gateway commands/feature FLOTEST
flread Check for Ansys gateway commands/feature FLREAD
fvmesh Check for Ansys gateway commands/feature FVMESH
grp Check for Ansys gateway commands/feature GRP
hropt Check for Ansys gateway commands/feature HROPT
hropt full Check for Ansys gateway commands/feature HROPT,FULL
hropt reduc Check for Ansys gateway commands/feature HROPT,REDUC
hropt msup Check for Ansys gateway commands/feature HROPT,MSUP
igesin Check for Ansys gateway commands/feature IGESIN
igesout Check for Ansys gateway commands/feature IGESOUT
modopt Check for Ansys gateway commands/feature MODOPT
modopt reduc Check for Ansys gateway commands/feature MODOPT,REDUC
modopt subsp Check for Ansys gateway commands/feature MODOPT,SUBSP
modopt unsym Check for Ansys gateway commands/feature MODOPT,UNSYM
modopt damp Check for Ansys gateway commands/feature MODOPT,DAMP
modopt lanb Check for Ansys gateway commands/feature MODOPT,LANB
modopt qrdamp Check for Ansys gateway commands/feature MODOPT,QRDAMP
mooney Check for Ansys gateway commands/feature MOONEY
mp Check for Ansys gateway commands/feature MP
mp ex Check for Ansys gateway commands/feature MP,EX
mp alpx Check for Ansys gateway commands/feature MP,ALPX
mp reft Check for Ansys gateway commands/feature MP,REFT
mp prxy Check for Ansys gateway commands/feature MP,PRXY
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
mp nuxy Check for Ansys gateway commands/feature MP,NUXY
mp gxy Check for Ansys gateway commands/feature MP,GXY
mp damp Check for Ansys gateway commands/feature MP,DAMP
mp mu Check for Ansys gateway commands/feature MP,MU
mp dens Check for Ansys gateway commands/feature MP,DENS
mp c Check for Ansys gateway commands/feature MP,C
mp enth Check for Ansys gateway commands/feature MP,ENTH
mp kxx Check for Ansys gateway commands/feature MP,KXX
mp hf Check for Ansys gateway commands/feature MP,HF
mp emis Check for Ansys gateway commands/feature MP,EMIS
mp qrate Check for Ansys gateway commands/feature MP,QRATE
mp visc Check for Ansys gateway commands/feature MP,VISC
mp sonc Check for Ansys gateway commands/feature MP,SONC
mp rsvx Check for Ansys gateway commands/feature MP,RSVX
mp perx Check for Ansys gateway commands/feature MP,PERX
mp murx Check for Ansys gateway commands/feature MP,MURX
mp mgxx Check for Ansys gateway commands/feature MP,MGXX
mp hgls Check for Ansys gateway commands/feature MP,HGLS
mp rigid Check for Ansys gateway commands/feature MP,RIGID
mp cable Check for Ansys gateway commands/feature MP,CABLE
mp ortho Check for Ansys gateway commands/feature MP,ORTHO
mp lsst Check for Ansys gateway commands/feature MP,LSST
mpdata Check for Ansys gateway commands/feature MPDATA
mpdata ex Check for Ansys gateway commands/feature MPDATA,EX
mpdata alpx Check for Ansys gateway commands/feature MPDATA,ALPX
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
mpdata reft Check for Ansys gateway commands/feature MPDATA,REFT
mpdata prxy Check for Ansys gateway commands/feature MPDATA,PRXY
mpdata nuxy Check for Ansys gateway commands/feature MPDATA,NUXY
mpdata gxy Check for Ansys gateway commands/feature MPDATA,GXY
mpdata damp Check for Ansys gateway commands/feature MPDATA,DAMP
mpdata mu Check for Ansys gateway commands/feature MPDATA,MU
mpdata dens Check for Ansys gateway commands/feature MPDATA,DENS
mpdata c Check for Ansys gateway commands/feature MPDATA,C
mpdata enth Check for Ansys gateway commands/feature MPDATA,ENTH
mpdata kxx Check for Ansys gateway commands/feature MPDATA,KXX
mpdata hf Check for Ansys gateway commands/feature MPDATA,HF
mpdata emis Check for Ansys gateway commands/feature MPDATA,EMIS
mpdata qrate Check for Ansys gateway commands/feature MPDATA,QRATE
mpdata visc Check for Ansys gateway commands/feature MPDATA,VISC
mpdata sonc Check for Ansys gateway commands/feature MPDATA,SONC
mpdata rsvx Check for Ansys gateway commands/feature MPDATA,RSVX
mpdata perx Check for Ansys gateway commands/feature MPDATA,PERX
mpdata murx Check for Ansys gateway commands/feature MPDATA,MURX
mpdata mgxx Check for Ansys gateway commands/feature MPDATA,MGXX
mpdata lsst Check for Ansys gateway commands/feature MPDATA,LSST
mscap Check for Ansys gateway commands/feature MSCAP
msdata Check for Ansys gateway commands/feature MSDATA
msmeth Check for Ansys gateway commands/feature MSMETH
msnomf Check for Ansys gateway commands/feature MSNOMF
msprop Check for Ansys gateway commands/feature MSPROP
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
msquad Check for Ansys gateway commands/feature MSQUAD
msrelax Check for Ansys gateway commands/feature MSRELAX
mssolu Check for Ansys gateway commands/feature MSSOLU
msspec Check for Ansys gateway commands/feature MSSPEC
msvary Check for Ansys gateway commands/feature MSVARY
nlgeom Check for Ansys gateway commands/feature NLGEOM
nrlsum Check for Ansys gateway commands/feature NRLSUM
optyp Check for Ansys gateway commands/feature OPTYP
optyp subp Check for Ansys gateway commands/feature OPTYP,SUBP
optyp first Check for Ansys gateway commands/feature OPTYP,FIRST
optyp rand Check for Ansys gateway commands/feature OPTYP,RAND
optyp run Check for Ansys gateway commands/feature OPTYP,RUN
optyp fact Check for Ansys gateway commands/feature OPTYP,FACT
optyp grad Check for Ansys gateway commands/feature OPTYP,GRAD
optyp sweep Check for Ansys gateway commands/feature OPTYP,SWEEP
optyp user Check for Ansys gateway commands/feature OPTYP,USER
opuser Check for Ansys gateway commands/feature OPUSER
pri2 Check for Ansys gateway commands/feature PRI2
prism Check for Ansys gateway commands/feature PRISM
psdcom Check for Ansys gateway commands/feature PSDCOM
psdfrq Check for Ansys gateway commands/feature PSDFRQ
psolve Check for Ansys gateway commands/feature PSOLVE
rate Check for Ansys gateway commands/feature RATE
resume Check for Ansys gateway commands/feature RESUME
rpr4 Check for Ansys gateway commands/feature RPR4
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
rprism Check for Ansys gateway commands/feature RPRISM
save Check for Ansys gateway commands/feature SAVE
se Check for Ansys gateway commands/feature SE
sesymm Check for Ansys gateway commands/feature SESYMN
setran Check for Ansys gateway commands/feature SETRAN
solve Check for Ansys gateway commands/feature SOLVE
sph4 Check for Ansys gateway commands/feature SPH4
sph5 Check for Ansys gateway commands/feature SPH5
sphere Check for Ansys gateway commands/feature SPHERE
spop Check for Ansys gateway commands/feature SPOP
spop sprs Check for Ansys gateway commands/feature SPOP,SPRS
spop mprs Check for Ansys gateway commands/feature SPOP,MPRS
spop ddam Check for Ansys gateway commands/feature SPOP,DDAM
spop psd Check for Ansys gateway commands/feature SPOP,PSD
srss Check for Ansys gateway commands/feature SRSS
tb Check for Ansys gateway commands/feature TB
tb bkin Check for Ansys gateway commands/feature TB,BKIN
tb mkin Check for Ansys gateway commands/feature TB,MKIN
tb miso Check for Ansys gateway commands/feature TB,MISO
tb biso Check for Ansys gateway commands/feature TB,BISO
tb aniso Check for Ansys gateway commands/feature TB,ANISO
tb dp Check for Ansys gateway commands/feature TB,DP
tb anand Check for Ansys gateway commands/feature TB,ANAND
tb melas Check for Ansys gateway commands/feature TB,MELAS
tb user Check for Ansys gateway commands/feature TB,USER
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
tb creep Check for Ansys gateway commands/feature TB,CREEP
tb swell Check for Ansys gateway commands/feature TB,SWELL
tb bh Check for Ansys gateway commands/feature TB,BH
tb piez Check for Ansys gateway commands/feature TB,PIEZ
tb fail Check for Ansys gateway commands/feature TB,FAIL
tb mooney Check for Ansys gateway commands/feature TB,MOONEY
tb water Check for Ansys gateway commands/feature TB,WATER
tb anel Check for Ansys gateway commands/feature TB,ANEL
tb concr Check for Ansys gateway commands/feature TB,CONCR
tb pflow Check for Ansys gateway commands/feature TB,PFLOW
tb evisc Check for Ansys gateway commands/feature TB,EVISC
tb plaw Check for Ansys gateway commands/feature TB,PLAW
tb foam Check for Ansys gateway commands/feature TB,FOAM
tb honey Check for Ansys gateway commands/feature TB,HONEY
tb comp Check for Ansys gateway commands/feature TB,COMP
tb nl Check for Ansys gateway commands/feature TB,NL
tb nliso Check for Ansys gateway commands/feature TB,NLISO
tb chab Check for Ansys gateway commands/feature TB,CHAB
tb boyce Check for Ansys gateway commands/feature TB,BOYCE
tb eos Check for Ansys gateway commands/feature TB,EOS
torus Check for Ansys gateway commands/feature TORUS
trnopt Check for Ansys gateway commands/feature TRNOPT
trnopt full Check for Ansys gateway commands/feature TRNOPT,FULL
trnopt reduc Check for Ansys gateway commands/feature TRNOPT,REDUC
trnopt msup Check for Ansys gateway commands/feature TRNOPT,MSUP
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
usrcal Check for Ansys gateway commands/feature USRCAL
v Check for Ansys gateway commands/feature V
va Check for Ansys gateway commands/feature VA
vadd Check for Ansys gateway commands/feature VADD
vcvfill Check for Ansys gateway commands/feature VCVFILL
vdrag Check for Ansys gateway commands/feature VDRAG
vext Check for Ansys gateway commands/feature VEXT
vgen Check for Ansys gateway commands/feature VGEN
vglue Check for Ansys gateway commands/feature VGLUE
vinp Check for Ansys gateway commands/feature VINP
vinv Check for Ansys gateway commands/feature VINV
vlscale Check for Ansys gateway commands/feature VLSCALE
vmesh Check for Ansys gateway commands/feature VMESH
voffset Check for Ansys gateway commands/feature VOFFSET
vovlap Check for Ansys gateway commands/feature VOVLAP
vptn Check for Ansys gateway commands/feature VPTN
vrotat Check for Ansys gateway commands/feature VROTAT
vsba Check for Ansys gateway commands/feature VSBA
vsbv Check for Ansys gateway commands/feature VSBV
vsbw Check for Ansys gateway commands/feature VSBW
vsymm Check for Ansys gateway commands/feature VSYMM
vtran Check for Ansys gateway commands/feature VTRAN
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
elem i Check to see if Ansys element type "i" is allowed.
Entity=PRODUCT,ENTNUM=0 (or blank)
Item1 It1num Description (return values: 1=allowed, 0=not allowed)
limit node Get maximum allowed node number
limit elem Get maximum allowed element number
limit kp Get maximum allowed keypoint number
limit line Get maximum allowed line number
limit area Get maximum allowed area number
limit vol Get maximum allowed volume number
limit dof Get maximum allowed dof number
limitm dof Get maximum allowed master dof number
A "get function" is available for some items, and can be used instead of the *GET command. The function returns the value and uses it where the function is input (bypassing the need for storing the value with a parameter name and inputting the parameter name where the value is to be used). For example, assume the average X-location of two nodes is to be calculated. Using the *GET command, parameter L1 can be assigned the X location of node 1 (*GET, L1, NODE, 1, LOC, X), and parameter L2 can be assigned the X location of node 2, then the mid location can be computed from MID = (L1+L2)/2. However, using the node location "get function" NX(N), which returns the X location of node N, MID can be computed directly from MID = (NX(1)+NX(2))/2, without the need for intermediate parameters L1 and L2. Get functions return values in the active coordinate system unless stated otherwise.
Get function arguments may themselves be parameters or other get functions. The get function NELEM(ENUM,NPOS) returns the node number in position NPOS for element ENUM. Combining functions, NX(NELEM(ENUM,NPOS)) returns the X location of that node. Get functions (where available) are shown with the corresponding *GET items in the tables below and are summarized at the end of this command description
Get functions are described at the beginning of this command (see "Notes") and are shown as alternatives to the *GET items where they apply. They are summarized here (grouped by functionality) for convenience.
Table B.1 *GET - Get Function Summary
| "Get Function" Summary | ||||||||
|---|---|---|---|---|---|---|---|---|
| Entity Status Get Function | Description | |||||||
| NSEL(N) | Status of node N: -1=unselected, 0=undefined, 1=selected. | |||||||
| ESEL(E) | Status of element E: -1=unselected, 0=undefined, 1=selected. | |||||||
| KSEL(K) | Status of keypoint K: -1=unselected, 0=undefined, 1=selected. | |||||||
| LSEL(L) | Status of line L: -1=unselected, 0=undefined, 1=selected. | |||||||
| ASEL(A) | Status of area A: -1=unselected, 0=undefined, 1=selected. | |||||||
| VSEL(V) | Status of volume V: -1=unselected, 0=undefined, 1=selected. | |||||||
| Next Selected Entity | ||||||||
| NDNEXT(N) | Next selected node having a node number greater than N. | |||||||
| ELNEXT(E) | Next selected element having an element number greater than E. | |||||||
| KPNEXT(K) | Next selected keypoint having a keypoint number greater than K. | |||||||
| LSNEXT(L) | Next selected line having a line number greater than L. | |||||||
| ARNEXT(A) | Next selected area having an area number greater than A. | |||||||
| VLNEXT(V) | Next selected volume having a volume number greater than V. | |||||||
| Locations | ||||||||
| CENTRX(E) | Centroid X-coordinate of element E in global Cartesian coordinate system. Centroid is determined from the selected nodes on the element. | |||||||
| CENTRY(E) | Centroid Y-coordinate of element E in global Cartesian coordinate system. Centroid is determined from the selected nodes on the element. | |||||||
| CENTRZ(E) | Centroid Z-coordinate of element E in global Cartesian coordinate system. Centroid is determined from the selected nodes on the element. | |||||||
| NX(N) | X-coordinate of node N in the active coordinate system. | |||||||
| NY(N) | Y-coordinate of node N in the active coordinate system. | |||||||
| NZ(N) | Z-coordinate of node N in the active coordinate system. | |||||||
| KX(K) | X-coordinate of keypoint K in the active coordinate system | |||||||
| KY(K) | Y-coordinate of keypoint K in the active coordinate system | |||||||
| KZ(K) | Z-coordinate of keypoint K in the active coordinate system | |||||||
| LX(L,LFRAC) | X-coordinate of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| LY(L,LFRAC) | Y-coordinate of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| LZ(L,LFRAC) | Z-coordinate of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| LSX(L,LFRAC) | X slope of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| LSY(L,LFRAC) | Y slope of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| LSZ(L,LFRAC) | Z slope of line L at length fraction LFRAC (0.0 to 1.0). | |||||||
| Nearest to Location | ||||||||
| NODE(X,Y,Z) | Number of the selected node nearest the X,Y,Z point (in the active coordinate system, lowest number for coincident nodes). | |||||||
| KP(X,Y,Z) | Number of the selected keypoint nearest the X,Y,Z point (in the active coordinate system, lowest number for coincident nodes). | |||||||
| Distances | ||||||||
| DISTND(N1,N2) | Distance between nodes N1 and N2. | |||||||
| DISTKP(K1,K2) | Distance between keypoints K1 and K2. | |||||||
| DISTEN(E,N) | Distance between the centroid of element E and node N. Centroid is determined from the selected nodes on the element. | |||||||
| Angles (in radians by default -- see the *AFUN command) | ||||||||
| ANGLEN(N1,N2,N3) | Subtended angle between two lines (defined by three nodes where N1 is the vertex node). Default is in radians. | |||||||
| ANGLEK(K1,K2,K3) | Subtended angle between two lines (defined by three keypoints where K1 is the vertex keypoint). Default is in radians. | |||||||
| Nearest to Entity | ||||||||
| NNEAR(N) | Selected node nearest node N. | |||||||
| KNEAR(K) | Selected keypoint nearest keypoint K. | |||||||
| ENEARN(N) | Selected element nearest node N. The element position is calculated from the selected nodes. | |||||||
| Areas | ||||||||
| AREAND(N1,N2,N3) | Area of the triangle with vertices at nodes N1, N2, and N3. | |||||||
| AREAKP(K1,K2,K3) | Area of the triangle with vertices at keypoints K1, K2, and K3. | |||||||
| ARNODE(N) | Area at node N apportioned from selected elements attached to node N. For 2-D planar solids, returns edge area associated with the node. For axisymmetric solids, returns edge surface area associated with the node. For 3-D volumetric solids, returns face area associated with the node. For 3–D, select all the nodes of the surface of interest before using ARNODE. | |||||||
| Normals | ||||||||
| NORMNX(N1,N2,N3) | X-direction cosine of the normal to the plane containing nodes N1, N2, and N3. | |||||||
| NORMNY(N1,N2,N3) | Y-direction cosine of the normal to the plane containing nodes N1, N2, and N3. | |||||||
| NORMNZ(N1,N2,N3) | Z-direction cosine of the normal to the plane containing nodes N1, N2, and N3. | |||||||
| NORMKX(K1,K2,K3) | X-direction cosine of the normal to the plane containing keypoints K1, K2, and K3. | |||||||
| NORMKY(K1,K2,K3) | Y-direction cosine of the normal to the plane containing keypoints K1, K2, and K3. | |||||||
| NORMKZ(K1,K2,K3) | Z-direction cosine of the normal to the plane containing keypoints K1, K2, and K3. | |||||||
| Connectivity | ||||||||
| ENEXTN(N,LOC) | Element connected to node N. LOC is the position in the resulting list when many elements share the node. A zero is returned at the end of the list. | |||||||
| NELEM(E,NPOS) | Node number in position NPOS (1--20) of element E. | |||||||
| NODEDOF(N) | Returns the bit pattern for the active DOFs at the specified node.
| |||||||
| Faces | ||||||||
| ELADJ(E,FACE) | For 2-D planar solids and 3-D volumetric solids, element adjacent to a face (FACE) of element E. The face number is the same as the surface load key number. Only elements of the same dimensionality and shape are considered. A -1 is returned if more than one is adjacent. | |||||||
| NDFACE(E,FACE,LOC) | Node in position LOC of a face number FACE of element E. The face number is the same as the surface load key number. LOC is the nodal position on the face (for an IJLK face, LOC=1 is at node I, 2 is at node J, etc.) | |||||||
| NMFACE(E) | Face number of element E containing the selected nodes. The face number output is the surface load key. If multiple load keys occur on a face (such as for line and area elements) the lowest load key for that face is output. | |||||||
| ARFACE(E) | For 2-D planar solids and 3-D volumetric solids, returns the area of the face of element E containing the selected nodes. For axisymmetric elements, the area is the full (360 degree) area. | |||||||
| Degree of Freedom Results | ||||||||
| UX(N) | UX structural displacement at node N. | |||||||
| UY(N) | UY structural displacement at node N. | |||||||
| UZ(N) | UZ structural displacement at node N. | |||||||
| ROTX(N) | ROTX structural rotation at node N. | |||||||
| ROTY(N) | ROTY structural rotation at node N. | |||||||
| ROTZ(N) | ROTZ structural rotation at node N. | |||||||
| TEMP(N) | Temperature at node N. For SHELL131 and SHELL132 elements with KEYOPT(3) = 0 or 1, use TBOT(N), TE2(N), TE3(N), . . ., TTOP(N) instead of TEMP(N). | |||||||
| PRES(N) | Pressure at node N. | |||||||
| VX(N) | VX fluid velocity at node N. | |||||||
| VY(N) | VY fluid velocity at node N. | |||||||
| VZ(N) | VZ fluid velocity at node N. | |||||||
| ENKE(N) | Turbulent kinetic energy (FLOTRAN) at node N. | |||||||
| ENDS(N) | Turbulent energy dissipation (FLOTRAN) at node N. | |||||||
| VOLT(N) | Electric potential at node N. | |||||||
| MAG(N) | Magnetic scalar potential at node N. | |||||||
| AX(N) | AX magnetic vector potential at node N. | |||||||
| AY(N) | AY magnetic vector potential at node N. | |||||||
| AZ(N) | AZ magnetic vector potential at node N. | |||||||
| Returns information about the data base manager | ||||||||
| VIRTINQR(1) | Number of pages in core. | |||||||
| VIRTINQR(4) | Page size in integer words. | |||||||
| VIRTINQR(7) | Maximum number of pages allowed on disk. | |||||||
| VIRTINQR(8) | Number of read/write operations on page. | |||||||
| VIRTINQR(9) | Maximum record number on page. | |||||||
| VIRTINQR(11) | Maximum pages touched. | |||||||
| Returns the current value of ANSYS filtering keywords. | ||||||||
| KWGET(KEYWORD) | Returns the current value the keyword specified by KEYWORD. See the ANSYS UIDL Programmer's Guide for a list of keywords and values. | |||||||
| Character String Functions Strings must be dimensioned (see *DIM) as a character parameter or enclosed in single apostrophes ('char'). | ||||||||
| Functions which return a double precision value of a numeric character string. | ||||||||
| VALCHR(a8) | a8 is a decimal value expressed in a string. | |||||||
| VALOCT (a8) | a8 is an octal value expressed in a string. | |||||||
| VALHEX(a8) | a8 is a hex value expressed in a string. | |||||||
| Functions which return an 8 character string of a numeric value. | ||||||||
| CHRVAL (dp) | dp is a double precision variable. | |||||||
| CHROCT (dp) | dp is an integer value. | |||||||
| CHRHEX(dp) | dp is an integer value. | |||||||
| Functions which manipulate strings: StrOut is the output string (or character parameter) Str1 and Str2 are input strings. Strings are a maximum of 128 characters. (see *DIM) | ||||||||
| StrOut = STRSUB(Str1, nLoc,nChar) | Get the nChar substring starting at character nLoc in Str1. | |||||||
| StrOut = STRCAT(Str1,Str2) | Add Str2 at the end of Str1. | |||||||
| StrOut = STRFILL(Str1,Str2,nLoc) | Add Str2 to Str1 starting at character nLoc. | |||||||
| StrOut = STRCOMP(Str1) | Remove all blanks from Str1 | |||||||
| StrOut = STRLEFT(Str1) | Left-justify Str1 | |||||||
| nLoc = STRPOS(Str1,Str2) | Get starting location of Str2 in Str1. | |||||||
| nLoc = STRLENG(Str1) | Location of last nonblank character | |||||||
| StrOut = UPCASE(Str1) | Upper case of Str1 | |||||||
| StrOut = LWCASE(Str1) | Lower case of Str1 | |||||||
| The following functions manipulate file names. | ||||||||
| Path String = JOIN ('directory','filename','extension') | Produces a contiguous pathstring. e.g. directory/filename.ext | |||||||
| Path String = JOIN ('directory','filename') | Produces a contiguous pathstring. e.g. directory/filename | |||||||
| SPLIT('PathString', 'DIR') | Produces a separate output of the directory from the pathstring. | |||||||
| SPLIT('PathString', 'FILE') | Produces a separate output of the complete filename (with extension) from the pathstring. | |||||||
| SPLIT('PathString', 'NAME') | Produces a separate output of the filename from the pathstring. | |||||||
| SPLIT('PathString', 'EXT') | Produces a separate output of the file extension from the pathstring. | |||||||
联系客服
