打开APP
userphoto
未登录

开通VIP,畅享免费电子书等14项超值服

开通VIP
神州数码DCRS-5950 端口配置

神州数码DCRS-5950 端口配置

(端口带宽限制:

RS(config-if-ethernet1/1)#bandwidth control 200000 both/receive/transmit 

端口流量控制:

RS(config-if-ethernet1/1)#flow control  // 大于端口缓存,则通知发送设备 减慢速度 以防丢失

端口速率:

RS(config-if-ethernet1/1)#speed-duplex force100-full

限制广播,组播,未知地址:

RS(config-if-ethernet1/1)#rate-suppression broadcast 10  //广播每秒 超过丢弃
RS(config-if-ethernet1/1)#rate-suppressi dlf 3 //未知地址
RS(config-if-ethernet1/1)#rate-suppressi multicast 5 //组播

端口环路检测:

RS(config-if-ethernet1/1)#loopback-detection control shutdown

RS(config)#loopback-detection control-recovery enable  //开启自动恢复功能

RS(config)#loopback-detection interval-time 200 50 //检测时间   不检测时间

端口隔离:

isolate-port group test //做组

isolate-port group test switchport interface ethernet 1/2
isolate-port group test switchport interface ethernet 1/1

isolate-port apply l2/l3/all  // 应用

链路聚合:

port-group 1 mode active

本站仅提供存储服务,所有内容均由用户发布,如发现有害或侵权内容,请点击举报
打开APP,阅读全文并永久保存 查看更多类似文章
猜你喜欢
类似文章
转:交换机实验 4.4.1 VLAN创建和配置
VLAN之间的通信方式说明
华为交换机配置实用手册
Loopback端口配置
网络设备配置技术总结
总结:华为、H3C、锐捷三家交换机配置命令详解
更多类似文章 >>
生活服务
热点新闻
分享 收藏 导长图 关注 下载文章
绑定账号成功
后续可登录账号畅享VIP特权!
如果VIP功能使用有故障,
可点击这里联系客服!

联系客服