一般大家调试都是在浏览器端调试js的,不过有些时候也想和后台一样在代码工具里面调试js或者node.js,下面介绍下怎样在vscode里面走断点。
一:在左侧扩展中搜索Debugger for Chrome并点击安装:
{ "version": "0.2.0", "configurations": [{ "type": "chrome", "request": "launch", "name": "Launch Chrome against localhost", "url": "http://localhost:8080", "webRoot": "${workspaceRoot}" }, { "type": "chrome", "request": "attach", "name": "Attach to Chrome", "port": 9222, "webRoot": "${workspaceRoot}" }, { "name": "Launch index.html (disable sourcemaps)", "type": "chrome", "request": "launch", "sourceMaps": false, "file": "${workspaceRoot}/jsTest/test1/test1.html" #每次需要修改这里的文件地址 } ]}
5:到这里就可以进行调试了,在
调试nodejs有很多方式,可以看这一篇 https://blog.risingstack.com/how-to-debug-nodej-js-with-the-best-tools-available/,
其中我最喜欢使用的还是V8 Inspector和vscode的方式。
在vscode中,点击那个蜘蛛的按钮
{ "version": "0.2.0", "configurations": [ { "type": "node", "request": "launch", "name": "Launch Program", "program": "${workspaceRoot}/index.js" }, { "type": "node", "request": "attach", "name": "Attach to Port", "address": "localhost", "port": 5858 } ]}
当request为launch时,就是launch模式了,这是程序是从vscode这里启动的,如果是在调试那将一直处于调试的模式。而attach模式,是连接已经启动的服务。比如你已经在外面将项目启动,突然需要调试,不需要关掉已经启动的项目再去vscode中重新启动,只要以attach的模式启动,vscode可以连接到已经启动的服务。当调试结束了,断开连接就好,明显比launch更方便一点。
很多时候我们将很长的启动命令及配置写在了package.json的scripts中,比如
"scripts": { "start": "NODE_ENV=production PORT=8080 babel-node ./bin/www", "dev": "nodemon --inspect --exec babel-node --presets env ./bin/www"},
我们希望让vscode使用npm的方式启动并调试,这就需要如下的配置
{ "name": "Launch via NPM", "type": "node", "request": "launch", "runtimeExecutable": "npm", "runtimeArgs": [ "run-script", "dev" //这里的dev就对应package.json中的scripts中的dev ], "port": 9229 //这个端口是调试的端口,不是项目启动的端口},
仅仅使用npm启动,虽然在dev命令中使用了nodemon,程序也可以正常的重启,可重启了之后,调试就断开了。所以需要让vscode去使用nodemon启动项目。
{ "type": "node", "request": "launch", "name": "nodemon", "runtimeExecutable": "nodemon", "args": ["${workspaceRoot}/bin/www"], "restart": true, "protocol": "inspector", //相当于--inspect了 "sourceMaps": true, "console": "integratedTerminal", "internalConsoleOptions": "neverOpen", "runtimeArgs": [ //对应nodemon --inspect之后除了启动文件之外的其他配置 "--exec", "babel-node", "--presets", "env" ]},
注意这里的runtimeArgs,如果这些配置是写在package.json中的话,就是这样的
nodemon --inspect --exec babel-node --presets env ./bin/www
这样就很方便了,项目可以正常的重启,每次重启一样会开启调试功能。
可是,我们并不想时刻开启调试功能怎么办?
这就需要使用上面说的attach模式了。
使用如下的命令正常的启动项目
nodemon --inspect --exec babel-node --presets env ./bin/www
当我们想要调试的时候,在vscode的debug中运行如下的配置
{ "type": "node", "request": "attach", "name": "Attach to node", "restart": true, "port": 9229}
联系客服