[技术]建立自己的躺式自行车（八） | 科技论坛

点击进入：建立自己的躺式自行车（七）


第2部分 构建三轮车尾部

Introduction 介绍
Building the Seat and Chain Stays is not an easy task.  The complete assembly requires a total of seven compound bends and comprises of five individual tubes of aluminum.  To make matters even worse, a total of seven miters are required to fit this assembly together.  If that wasn't enough, the whole assembly must be TIG welded (including a pair of dropouts).  the end results will be well worth the effort, as these stays are of the finest design in the recumbent industry. 座椅和建设连锁住宿不是一件容易的事。大会需要一个完整的化合物共七弯及铝合金管组成的五个人。为了使事情变得更糟，一共有七miters都必须符合这一集在一起。如果这还不够，整个程序集必须氩弧焊焊接（包括辍学对）。最终结果将是非常值得的努力，因为这些行业都保持了横卧最好的设计。
This section constitutes a major effort on my part, as precise detail and instruction are required.  Pay careful attention to all instructions.  If you feel lost, please E-mail me. 这部分构成了重大努力，对我而言，作为准确的细节和指导是必需的。小心注意所有的指示。如果你感到失落，请E - mail给我。
Design Overview 设计概述
The illustrations below represents all aspects of the trike rear-end.  Regardless of how each part is fabricated, the end results should appear as dimensioned in these drawings. 下面的插图表示，年底各方面的三轮车后面。不管如何使每个部分是捏造的，最终结果应显示在这些图纸尺寸。

The above drawing dipicts a side and top view of the chain stays.如上图 dipicts侧面和顶视图链停留。