<HuangRong>system-view
Enter system view, return user view with Ctrl+Z.
[HuangRong]dis cu
#
sysname HuangRong
#
vlan batch 1 100 200
#
bpdu enable
#
cluster enable
ntdp enable
ntdp hop 16
ndp enable
#
voice-vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 description Simens phone
voice-vlan mac-address 0003-6b00-0000 mask ffff-ff00-0000 description Cisco phone
voice-vlan mac-address 0004-0d00-0000 mask ffff-ff00-0000 description Avaya phone
voice-vlan mac-address 0060-b900-0000 mask ffff-ff00-0000 description Philips/NEC phone
voice-vlan mac-address 00d0-1e00-0000 mask ffff-ff00-0000 description Pingtel phone
voice-vlan mac-address 00e0-7500-0000 mask ffff-ff00-0000 description Polycom phone
voice-vlan mac-address 00e0-bb00-0000 mask ffff-ff00-0000 description 3com phone
#
vlan 100 --------------------------------创建VlAN
description To_Client --------------------------------VLAN描述
vlan 200
description To_ShangXing
#
interface Vlanif1
#
interface Vlanif100 -----------------------------------创建VLAN虚拟接口
description To_TEST -----------------------------------描述
ip address 10.38.18.65 255.255.255.192 -----------------------------------对虚拟接口配置IP地址
#
interface Ethernet0/0/1 ------------------------------------交换机端口
description To_Client ------------------------------------端口描述
port default vlan 100 -----------------------------------将端口模式设置为access模式,
ntdp enable
ndp enable
#
interface Ethernet0/0/2
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/3
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/4
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/5
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/6
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/7
port default vlan 1
ntdp enable
ndp enable
#
interface Ethernet0/0/8 ------------------------配置交换机上联接口
description To_ShangXing
port link-type trunk ------------------------将交换机端口模式配置为Trunk
port trunk allow-pass vlan 2 to 4094 -------------------------配置端口允许通过的VLAN
ntdp enable
ndp enable
#
interface GigabitEthernet0/0/1
port default vlan 1
ntdp enable
ndp enable
#
interface NULL0
#
aaa ----------------进入AAA模式
local-user shonghua password cipher U%%-E+'-/U_Q=^Q`MAF4<1!! ------配置用户名和密码(simple明文,ciper密码)
local-user shonghua service-type terminal telnet ----------------设置交换机远程访问方式(telnet,ssh)
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
#
ip route-static 0.0.0.0 0.0.0.0 10.38.18.64 ----------------配置交换机默认路由,在交换机是(stub)末梢时起默认路由,指向网关设备
#
user-interface con 0 ---------------交换机Console配置
authentication-mode aaa ---------------Console认证方式
user-interface vty 0 4 ---------------远程登录0-4表述可以同时在线5个人
authentication-mode aaa ---------------VTY认证方式
user privilege level 15 ---------------设置访问权限
#
return
本站仅提供存储服务，所有内容均由用户发布，如发现有害或侵权内容，请
点击举报。
