如何挂载另一个lvm硬盘

由于测试导致系统启动不了，需要将系统中的数据拷贝出来，所以想到将磁盘挂载到另一个能用的系统中进行拷贝，但是由于创建的系统都是用默认的方式创建的，所以一般的系统盘都是由两个分区组成，例如/dev/sda，/dev/sda1用来存放启动项，而/dev/sda2是一个逻辑卷，都是由/dev/VolGroup/lv_root、/dev/VolGroup/lv_home、/dev/VolGroup/lv_swap三部分组成的，由于逻辑卷的名字是一样的，所以这样导致将系统盘/dev/sdb挂载后，其中的逻辑卷部分不能挂载。

解决方法：

下面介绍分区格式为为Linux LVM的虚拟机挂载另一块的Linux LVM硬盘的方法：

在Hyper-V上添加要挂载的硬盘，开启虚拟机，启动好以后

#fdisk -l   //下面会看到所有硬盘的情况，sda是虚拟机自己的硬盘，sdb则是挂载上去的硬盘

[root@localhost ~]# fdisk -lDisk /dev/sda: 1000.2 GB, 1000204886016 bytes255 heads, 63 sectors/track, 121601 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 4096 bytesI/O size (minimum/optimal): 4096 bytes / 4096 bytesDisk identifier: 0x000c4715 Device Boot Start End Blocks Id System/dev/sda1 * 16451200083 LinuxPartition 1 does not end on cylinder boundary./dev/sda2 64121602976248832 8e Linux LVMDisk /dev/mapper/VolGroup-lv_root: 53.7 GB, 53687091200 bytes255 heads, 63 sectors/track, 6527 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 4096 bytesI/O size (minimum/optimal): 4096 bytes / 4096 bytesDisk identifier: 0x00000000Disk /dev/mapper/VolGroup-lv_swap: 8338 MB, 8338276352 bytes255 heads, 63 sectors/track, 1013 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 4096 bytesI/O size (minimum/optimal): 4096 bytes / 4096 bytesDisk identifier: 0x00000000Disk /dev/mapper/VolGroup-lv_home: 937.6 GB, 937649242112 bytes255 heads, 63 sectors/track, 113996 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 4096 bytesI/O size (minimum/optimal): 4096 bytes / 4096 bytesDisk identifier: 0x00000000Disk /dev/sdb: 120.0 GB, 120034123776 bytes255 heads, 63 sectors/track, 14593 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000ec679 Device Boot Start End Blocks Id System/dev/sdb1 * 16451200083 LinuxPartition 1 does not end on cylinder boundary./dev/sdb2 6414594116707328 8e Linux LVM

#vgscan  //扫描所有卷组

[root@localhost ~]# vgscan Reading all physical volumes. This may take a while... WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX Found volume group 'VolGroup'using metadata type lvm2 Found volume group 'VolGroup'using metadata type lvm2

#vgdisplay  //显示出多有卷组信息

[root@localhost ~]# vgdisplay WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX (created here) takes precedence over FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ --- Volume group --- VG Name VolGroup System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 111.30 GiB PE Size 4.00 MiB Total PE 28492 Alloc PE / Size 28492 / 111.30 GiB Free PE / Size 0 / 0 VG UUID JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX --- Volume group --- VG Name VolGroup System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 931.02 GiB PE Size 4.00 MiB Total PE 238341 Alloc PE / Size 238341 / 931.02 GiB Free PE / Size 0 / 0 VG UUID FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ

（主要是通过大小来区分的）

[root@localhost ~]# vgrename JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX vg01 WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ (created here) takes precedence over JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX WARNING: Duplicate VG name VolGroup: Existing JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX (created here) takes precedence over FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ Volume group 'VolGroup' successfully renamed to 'vg01'

  //重新命名挂载盘的卷组名，因为和虚拟机本身的卷组名是一样的所以LVM分区无法挂载，必须改名（要修改挂载盘的卷组名，这里要分编号哪个是挂载上去的），这里的类似于序列号的就是VG UUID，卷组名是一样的，只能靠VG UUID来修改卷组名

看到最下面Volume group 'VolGroup00' successfully renamed to 'vg01'则说明改名成功

#vgdisplay    //可以看到已经有一个改名为vg01

[root@localhost ~]# vgdisplay --- Volume group --- VG Name vg01 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 111.30 GiB PE Size 4.00 MiB Total PE 28492 Alloc PE / Size 28492 / 111.30 GiB Free PE / Size 0 / 0 VG UUID JTFVF9-ULu5-cHKu-T1p3-4HnB-Tk2p-BpjwHX --- Volume group --- VG Name VolGroup System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 931.02 GiB PE Size 4.00 MiB Total PE 238341 Alloc PE / Size 238341 / 931.02 GiB Free PE / Size 0 / 0 VG UUID FKsJuO-7348-hHqs-MKVq-WLMl-2Sbh-0oh8NZ

#lvscan     //看到上面两个是挂在上去的磁盘，没有激活

[root@localhost ~]# lvscan inactive '/dev/vg01/lv_root' [50.00 GiB] inherit inactive '/dev/vg01/lv_home' [53.45 GiB] inherit inactive '/dev/vg01/lv_swap' [7.85 GiB] inherit ACTIVE '/dev/VolGroup/lv_root' [50.00 GiB] inherit ACTIVE '/dev/VolGroup/lv_home' [873.25 GiB] inherit ACTIVE '/dev/VolGroup/lv_swap' [7.77 GiB] inherit可以看到下面ACTIVE是正在使用的系统盘，而上面是需要拷贝出来的系统盘

#vgchange -ay /dev/vg01     //激此卷组

[root@localhost ~]# vgchange -ay /dev/vg01 3 logical volume(s) in volume group 'vg01' now active

#lvscan    //看下vg01的卷组是否被激活

[root@localhost ~]# lvscan ACTIVE '/dev/vg01/lv_root' [50.00 GiB] inherit ACTIVE '/dev/vg01/lv_home' [53.45 GiB] inherit ACTIVE '/dev/vg01/lv_swap' [7.85 GiB] inherit ACTIVE '/dev/VolGroup/lv_root' [50.00 GiB] inherit ACTIVE '/dev/VolGroup/lv_home' [873.25 GiB] inherit ACTIVE '/dev/VolGroup/lv_swap' [7.77 GiB] inherit

#mkdir  /mnt/hdb    //新建一个文件夹用来作为挂载点

#mount  /dev/vg01/逻辑卷名（比如LogVol00）  /mnt/hdb    //挂载vg01/LogVol00

使用完以后要卸载

#umount  /mnt/hdb

#vgchange  -an  /dev/vg01   去除激活的LVM分区

修改过卷组名的这个硬盘是不能再启动了，应为默认启动引导是引导到VolGroup00卷组的，所以修改过卷组名的硬盘要想仍能重新启动的话，必须把卷组名修改会默认的VolGroup00

但是在已经有VolGroup00卷组的虚拟机上是不能修改的！这里我们单独建立一个分区格式不是Linux LVM格式的虚拟机来挂载硬盘，其格式为ext3的（显示为Linux）

#fdisk -l      //查看是否识别挂上的硬盘

#vgscan      //扫描卷组

#lvscan //查看要改名的卷组是否被激活，要是被激活的话则不能修改卷组名，如果直接修改的话会提示报错

#vgchange -an /dev/VolGroup00      //如果上一步骤是激活状态，则需用此命令修改为不激 活状态

#lvscan    //查看是否修改为不激活状态

#vgrename  vg01  VolGroup00    //修改为不激活状态则可以修改卷组名

在ext3格式分区的虚拟机上直接挂载Linux LVM分区的硬盘的方法如下：

#fdisk -l      //查看是否识别挂上的硬盘

#vgscan    //扫描卷组

#vgdisplay     //显示所有卷组

#lvscan    //查看挂载的磁盘的卷组是否处于激活的状态

#vgchange -ay /dev/VolGroup00    //如上步看到没有激活，则执行此命令

#mkdir  /mnt/hdb    //创建挂载点的文件夹

#mount  /dev/VolGroup00/LogVol00   /mnt/hdb    // 挂载，挂载后则可以访问/mnt/hdb

#umount  /mnt/hdb    //卸载磁盘

#vgchange -an /dev/VolGroup00    //去除挂载磁盘卷组的激活状态

补充如果要设置开机自动加载LVM分区：

vim /etc/fstab

加入

/dev/vg110/LogVol01     /wwwroot/               ext4    defaults        0 0

分类: ext2文件系统系列,杂项

好文要顶关注我收藏该文

Jessica程序猿
关注 - 24
粉丝 - 62