================================================== ================
[Concept]
Also known as low-temperature geothermal hot water floor heating radiant floor heating, low temperature radiant floor is a ground for the internal use of the building heating system.
================================================== ================
[For use]
1 It saves the effective use of the room area, and can effectively save energy.
(2) the use of low temperature hot water floor heating real feel temperature higher than the actual temperature of 2 ℃ ~ 4 ℃.
3 it is consistent, "according to metering, sub-room thermostat" requirements, no one can stop home heating, the population came from people active in the heating room, no room to turn off the valve.
4 long life, the use of plastic composite pipe is recognized as the world of material life of 50 years.
5 This approach also has the heating can reduce the noise floor, clean, heat a wide choice for renovation and so on.
================================================== ================
【Type】
On the pavement in the geothermal laminate flooring and solid wood flooring, floor deformation solves the problem, but there is a greater risk, and can only be regarded as a no choice.
Best to use solid wood flooring and more environmentally friendly. But higher prices.
================================================== ================
[Purchase] selected
-------------------
[Stability]
Used to heat the floor of the complex environment, especially in the northern region, non-heating season the ground to withstand moisture, and heating again when a sudden increase in surface temperature, the floor must withstand the "temperature", "humidity" double change. So we must choose to heat the floor material and good stability. Teak is recognized worldwide as the stability of the best wood, inside and outside the industry recognized as the best wood to heat the floor, but the higher price.
-------------------
[Green is good]
This indicator is most concerned about, after all, related to health and safety of use.
Strengthening, solid wood flooring, these must be used glue, glue is formed by the formaldehyde and benzene. Composite flooring formaldehyde volatile, many diseases are now the volatile formaldehyde and benzene angered disaster. Laminate flooring do better environmental protection, it is difficult to withstand repeated baking hot residence. Especially for a long time in the hot state, high temperature is bound to accelerate the emission of harmful gases, to warm the room is closed, the indoor environment can be imagined. Solid wood flooring is natural, there are no environmental issues.
-------------------
[Cost-]
Solid wood floors can be reused, high cost, teak flooring, "once owned by several generations of benefit" in the world.
Currently, imports of geothermal special multi-layer, generally life is 10-15 years, made 3-5 years. Solid wood floors can be reused, especially teak floor with the stability of the longer the better, with more prettier. Teak has a "once owned by several generations of income" in the world, if you like, you can have with children and grandchildren (pass) continue to see those thousands of years on the teak is still preserved palaces, temples, luxury tanker is not difficult to understand. Of course, the premise must be authentic teak, forest tours are every piece of teak flooring from Myanmar virgin forest.
-------------------
[Excellent thermal conductivity]
Wood is a good natural materials, surface heat transfer through the floor to the surface, there must be heat loss, ideal floor is based on both the foot feeling good these losses can at a reasonable range.
Multi-layer wood is 12-15mm thick, solid wood is 18mm thick. 3-5mm thickness differences, some people thus identified as multi-layer thermal conductivity of solid wood solid wood. Practice has proved that the thermal conductivity of pure solid wood as much as multi-layer solid wood, first, the thickness difference is small; Second, is multi-layered solid wood leather and glue, glue this structure, especially higher coefficient of thermal resistance. And installation of geothermal heat is directly installed in the ground layer of the above, there is no air resistance problem, the air resistance coefficient is the highest heat, so if it is installed with a traditional keel, there is air resistance problem.
-------------------
[Insulation is good]
The wood itself is a cool body temperature. The insulating effect of pure wood far beyond the wood composite and laminate flooring.
==================================================
【Article is excerpted from: Baidu Encyclopedia】
【Network reprint / Just reference】
【Translation is by Goolge】
