mmc0: error -84 whilst initialising SD card
mmc0: error -84 whilst initialising SD card
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA16G 14.4 GiB
mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0
mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: unable to read partition table
UBI: scanning is finished
UBI: attached mtd7 (name "rootfs_0", size 139 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1116, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volume
=====================================================================
mmc0: error -84 whilst initialising SD card
mmc0: error -84 whilst initialising SD card
mmc0: error -84 whilst initialising SD card
mmcblk0: mmc0:0002 00000 7.32 GiB
regulator-dummy: disabling
UBI: attaching mtd7 to ubi0
mmcblk0:
=======================================================================
fdisk: cannot open /dev/mmcblk0: Input/output error
======================================================================
mmc0: new high speed SDHC card at address 0002
NET: Registered protocol family 17
mmcblk0: mmc0:0002 00000 7.32 GiB
NET: Registered protocol family 15
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
8021q: 802.1Q VLAN Support v1.8
mmcblk0: timed out sending r/w cmd command, card status 0x800900
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
regulator-dummy: disabling
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
UBI: attaching mtd7 to ubi0
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
mmc0: Got data interrupt 0x02200000 even though no data operation was in progress.
mmcblk0: timed out sending r/w cmd command, card status 0x800900
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: unable to read partition table
UBI: scanning is finished
UBI: attached mtd7 (name "rootfs_0", size 1
