一、NFS
http://nfs.sourceforge.net/nfs-howto/
Set NFS boot mode: Enter the following commands in Uboot. Please replace the gray text with your actual environment setting and place last 3 lines into a single line.
setenv ethaddr 00:1A:80:A9:D0:07
setenv ipaddr 192.168.1.3
setenv serverip 192.168.1.2
setenv netmask 255.255.255.0
setenv userlandpath /mnt/rootfs-XarinaEntry-039
setenv bootargsset setenv bootargs noinitrd root=/dev/nfs nfsroot=\$(serverip):\$(userlandpath) ip=\$(ipaddr):\$(serverip)::\$(netmask)::eth0: console=ttyAMA0,\$(baudrate)n8 mem=64M gpio_careports=0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00
After above commands are executed, please save the Uboot setting by entering this command.
saveenv
===================================================================
二、
CXD4145GG_SDK_SW_StartupGuide
This document describes how to install SDK step by step.
CXD4145GG_SDK_StartupGuide_E.doc
三、Create/modify command-line applications
How to create or modify command-line applications is documented：
CXD4145GG_Application_Development_Guide.doc
四、Create/modify web applications
How to create or modify web applications is documented in
'CXD4145GG_Application_Development_Guide.doc’. Please refer to this document to know its detail.
本站仅提供存储服务，所有内容均由用户发布，如发现有害或侵权内容，请
点击举报。
