XARINA# help
- alias for 'help'
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootcofw- boot core firmware image(no wait for boot)
bootcofw_l- boot downloaded coreFW image (no wait for boot)
bootcofw_w- boot coreFW image (wait for boot)
bootcpu1- bootcpu1- only boot cpu1
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
chpart - change active partition
cmp - memory compare
cofwinfo- print header information for coreFW image
cp - memory copy
crc32 - checksum calculation
dhcp - boot image via network using DHCP/TFTP protocol
env - environment handling commands
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fdt - flattened device tree utility commands
go - start application at address 'addr'
gpio - usage: gpio e3 [1|0]
help - print command description/usage
i2c - I2C sub-system
iminfo - print header information for application image
loadb - load binary file over serial line (kermit mode)
loadprm - load paramter
loads - load S-Record file over serial line
loadx - loadx - load binary file over serial line (xmodem mode)
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
menu - menu - go menu mode
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - display MMC info
mtdparts- define flash/nand partitions
mtest - simple RAM read/write test
mw - memory write (fill)
nand - NAND sub-system
nboot - boot from NAND device
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
script - execute script
sensdet - Automatic detection and parameter settings of a sensor
setenv - set environment variables
sleep - delay execution for some time
statusledoff- turn off status led
statusledon- blink status led (max period = 8 seconds)
testbench- run test bench
tftpboot- boot image via network using TFTP protocol
ubi - ubi commands
ubifsload- load file from an UBIFS filesystem
ubifsls - list files in a directory
ubifsmount- mount UBIFS volume
ubifsumount- unmount UBIFS volume
update - update u-boot, u-boot_recover or spl
version - print monitor, compiler and linker version
xarina_copa_update- copa update for xarina
xarina_fdt_update- fdt update for xarina
